Directions For Use:

*Clean gross filth by using standard manual cleaning protocols.
*Close the room to the general public. Place signs or warning indicators on doors that indicate no one should enter the room.
*Power off any sensitive electrical devices but do not unplug them.
*Choose the appropriate Clorox-approved product for cleaning, sanitizing or disinfecting.
*Mount desired Clorox-approved product on Clorox® Total 360® Electrostatic Sprayer base and strap into place. Ensure that the bottles are positioned with the opening facing up and the opening facing the dispensing tubes.
*Unscrew the lid on the Clorox-approved product of your choice and connect the Clorox® Total 360® Electrostatic Sprayer dispensing cap to the bottle. Be sure the cap is screwed all the way down; do not overtighten.
*Unwrap electrical cord completely and plug Clorox® Total 360® Electrostatic Sprayer into a grounded, three-pronged socket.
*Locate the On/Off switch on the base unit. Push the Total 360 Sprayer to the On position. A blue light will illuminate on both the sprayer instrument panel and unit power switch.
*Put on appropriate personal protective equipment.
*Remove the sprayer from the unit. A blue power indicator light should be illuminated on the sprayer. The system is now ready for use.
*Prime the Clorox® Total 360® Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner. Spray the Clorox® Total 360® Electrostatic Sprayer for about 20 seconds to generate a steady flow of solution.
*When spraying, a second blue indicator light will illuminate on the sprayer instrument panel when the trigger is depressed. NOTE: Sprayer will automatically stay on until trigger is depressed again.
Download Quick Start Guide (PDF)

*Position the Clorox® Total 360® Electrostatic Sprayer in a rear corner of the area.
*Direct the nozzle at the desired surface.
*Begin to spray. Press the sprayer button once to initiate spraying. Press once to stop flow of the sprayer.
*Follow a continuous path around the area, working from high to low areas and moving the sprayer in a sweeping motion until surfaces are thoroughly wet. After spraying, keep the area closed per product SDSs.
*Open the room once the reentry time has passed.

*Stop spraying the Clorox® Total 360® Electrostatic Sprayer.
*Disconnect the bottle connection from the Clorox-approved product that is to be changed, and remove it from the sprayer. Cap the removed product if it is being stored.
*Purge the Clorox® Total 360® Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner for about 20 seconds.
*Choose the appropriate Clorox-approved product for cleaning, sanitizing or disinfecting.
*Mount the product on the sprayer’s base and strap it into place. Ensure that bottle opening faces up and toward the dispensing tubes.
*Unscrew the product lid and connect the Clorox® Total 360® Electrostatic Sprayer dispensing cap to the bottle. Be sure the cap is screwed all the way down; do not overtighten.
*Prime the Clorox® Total 360® Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner. Spray the Clorox® Total 360® Electrostatic Sprayer for about 20 seconds to generate a steady flow of solution.
*Stop spraying the Clorox® Total 360® Electrostatic Sprayer.
*Disconnect the bottle connection from the Clorox-approved product, and remove it from the sprayer. Cap the removed product if it is being stored.
*Purge the Clorox® Total 360® Electrostatic Sprayer: Spray into a container, a drain or an inconspicuous corner. Spray the Clorox® Total 360® Electrostatic Sprayer for about 20 seconds.
*Turn off the unit. The blue indicator light on the instrument panel and base of the unit should no longer be illuminated.
*Unplug the Clorox® Total 360® Electrostatic Sprayer.
*Wrap cord on cord holder on the base unit.
*Store in a safe, dry place.